Stone veneer installation in Henderson NV - built on a wall that can carry it
Tired of bare block or worn stucco on your house? We check the wall behind it first, then set stone that's done right.
- Licensed and insured.
- Free on-site estimates.
- We respond within 1 business day.
Can my house wall take stone veneer?
Stone veneer installation in Henderson means setting stone in mortar over metal lath on an outside wall, so plain block, stucco or framing ends up looking like a stone wall. At Artisan Henderson Concrete and Masonry, the first thing I look at is what that wall is made of, because it decides how the whole job goes.
Most folks who call us are looking at a stucco front, a block yard wall or a couple of columns by the entry they're tired of, and they want stone on it. The price moves with how much wall you're covering, which stone you pick and how much prep the wall needs before any stone goes on, and old stucco or painted block can add real work. The schedule turns on that same prep, plus any permit the job needs and the summer heat, since we plan our days around it. If you'd rather have a solid stone wall than a facing, that's stone masonry, and I'm glad to talk through both. After I've seen your wall, the written estimate I leave puts a number on your job.
How do you know your stone or stucco wall needs work?
Cracked or hollow stucco
You see cracks running off the window corners, or a spot that sounds hollow when you knock on it. That usually means the lath and fasteners behind it have let go, and every storm pushes more water into the wall, so there's more to tear out the longer it sits.
Painted or sealed block
Your block wall was painted to match the house, or it has a shiny sealer on it. Mortar can't grab a coated face the way it grabs bare block, so that wall needs prep before stone goes on, and fixing loose stone later costs more than prepping once.
Stones loose or cracking
A few pieces of your existing stone rock when you push them, the joints are cracked, or there's white staining low on the wall. That usually means water is getting behind it with nowhere to drain, and if you wait, more stones come off and the wall underneath starts to break down.
How we handle stone veneer installation
We start with the wall every time, because my old boss used to say stone is only as good as what's holding it up. I check whether it's block, stucco or framing and whether it's been painted or sealed, and if it's old stucco, it usually needs rebuilding first, which I'll tell you at the estimate instead of halfway through the job. Once the wall is ready, we put up the water barrier and metal lath, trowel on a scratch coat, set each stone in mortar from the bottom up, fill and tool the joints, and clean the stone and your yard before we leave.
A lot of stone goes on walls we build ourselves. If you want a stone-faced yard wall, we can put up the concrete block walls first and face them while the block is still bare and clean. Where the stone runs down to a base wall that's in rough shape, foundation block wall installation comes before the veneer, so the stone sits on something solid.
Get a written estimate for stone on your wall
Send the form and we'll get back to you within one business day to set a time. I'll come out, look at your wall with you and leave a free written estimate, with no obligation.
- team@hendersonconcreteandmasonry.com
- Based in
- Henderson, NV 89015
- Hours
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 7 AM–9 PM
What happens when you call about stone veneer in Henderson?
Here's how a stone veneer job goes with us, from your first call to the walk-around once the last stone is set.
Call or send a message
You call (702) 832-0706 or use the form, tell us what the wall is, and send a photo if you have one. We set a time for me to come out.
I look at your wall
I come out myself, check what's under the surface and ask what you've noticed. The written estimate spells out the stone, the prep and any rebuilding, so none of it shows up later as a surprise.
Our crew sets the stone
Once you say go, we take care of any permit the job needs and our own crew does the work. I check on it along the way, not just at the end.
Walk the finished wall together
When the joints are tooled and the site is cleaned up, I walk the finished job with you before we pack up. That's the time to point out anything you want looked at again.
Why Henderson homeowners call Artisan Henderson Concrete and Masonry for stone veneer
On a veneer job, the part that counts most is the part you'll never see again once the stone is on. Tell us about your wall and I'll come out and look at it with you.
The owner comes out every time
I look at every job myself and write the estimate, and I check our crew's work while the stone goes up. The person who saw what's behind your stucco is the one keeping an eye on it.
In business since 2021
We've been in business since 2021, after I spent years on my old boss's crews, and repair work on brick, block and stone is what we're best known for. Fixing why a wall failed teaches you how to build one that holds up.
Licensed and insured on your job
We're licensed and insured. If something goes wrong while our crew is up on a ladder at your house, you're not the one left holding it.
Working around Henderson's summer heat
Henderson afternoons dry mortar out fast, so on hot days we start early and dampen the stone and the wall before they meet. Mortar that dries too quick doesn't grab, and that's how stones work loose later.
Stone veneer, wall prep and permits in Henderson
In Henderson, the city's Building and Fire Safety Department issues permits and does the plan checks and inspections that confirm work meets building code. Whether your veneer job needs a permit depends on the job, and the rules differ between the cities and the county, so we check with the office that covers your address before we start. When a permit is needed, we apply for it, set up the inspections and meet the inspector.
What we see most here is stucco houses and block yard walls, plenty of them painted to match, and both mean prep before stone. We meet the same walls on jobs in Paradise and Spring Valley, and we handle them the same way.
Questions about stone veneer in Henderson
Can stone veneer go over existing stucco in Henderson?
Usually not as it is. A mason contractors' trade article advises against setting veneer over existing or damaged stucco, because nobody can tell how sound the old lath and fasteners behind it are. It's fine once the wall is rebuilt to carry the stone, so if your house is stucco, plan for that wall work in your budget.
Can stone veneer go directly on a concrete block wall?
Often, yes, if the block is clean, sound, unpainted and unsealed. One stone maker's install guide allows its veneer straight onto block in that condition, and a painted or sealed wall doesn't meet it. Each product's instructions set the prep, so we go by the ones for the stone you pick.
How much does stone veneer installation cost in Henderson, NV?
Installing stone veneer in Henderson usually costs about $2,600 to $10,000 per job. Where you land depends mostly on how much wall you're covering, the stone you choose and how much prep the wall needs first. The written estimate I leave after seeing your wall gives you your own figure.
Can I install stone veneer on my own house in Nevada?
Sometimes, if it's a home you'll live in yourself. The Nevada State Contractors Board lists an exemption for owners building or improving a home for personal occupancy, not for sale or lease, and it comes with conditions and an application, so check those before you start. The board also lists repair or maintenance work under $1,000, counting labor and materials, but that changes in certain cases, such as when a building permit is required.
What is the best way to choose between thin and full thickness stone veneer?
For most house walls, natural thin stone is the easier pick. A trade guide notes thin stone weighs less than full thickness stone, which helps keep production, shipping and building costs down, and it can go up without footings or ledges. Full thickness stone needs that support, so it makes more sense on a new wall built with a footing under it.
What causes stone veneer to leak or come loose?
Usually it's water that gets behind the stone and can't get back out. General practice calls for two separate layers of house wrap or building felt, sealed with tape, behind adhered veneer, and one layer can be dropped when a drainage mat sits right against the lath, where local codes allow it. The weep screed, the metal strip along the bottom that lets water out, should sit at least four inches above the ground and two inches above a roof line, so ask any installer where theirs will go.
Wall work that often comes before stone
Concrete block walls
If you want a stone-faced yard or privacy wall, a new block wall built straight and clean gives the stone a bare face to grab from day one.
Foundation block wall installation
When the wall at the base of your house is cracked or settling, a rebuilt foundation block wall gives new stone something solid to sit on.
Service areas for stone veneer around Henderson
Artisan Henderson Concrete and Masonry is based in Henderson, NV, and we set stone veneer in the cities around it. Ten cities have their own page here, including Boulder City and Summerlin South. If yours isn't on the list, give us a call and ask.
Henderson, NV
Send us a photo of your wall
Tell us whether it's block, stucco or framing and whether it's painted, and a photo or two lets me come out already knowing what to check.